This is directed to Jeff Smith – great article on ignition timing.  I have a few questions.   My problem is I can’t seem to get the timing right with either the initial or […]

I have a 302-cubic-inch small block Ford engine that I’ve inherited from a friend. It’s an older carbureted engine that I think is stock – it still has a 2-barrel carburetor. […]

I’ve read something about camshafts that some cam companies grind advance into the camshaft. I thought that you could only advance the cam once it was installed in the engine? […]

A friend of mine suggested using a big-block oil pump on my small-block Chevy in order to get smoother flow and more volume with a stock volume pump? Will that […]

I just installed a new cam in my small block Chevy. The engine runs great, but I’ve noticed that at idle and at some cruising speeds the engine makes a […]

I’m hearing all kinds of things about ethanol in fuel that will destroy a normal rubber fuel line. Should I change the fuel line in my car? I’ve heard that […]

I am about to rebuild my first small block Chevy and I’ve been looking at parts and prices and noticed something. The bearing companies list several part numbers for things […]

Now that the temperature is heating up and my engine seems to be running hotter, I’m reading all kinds of stuff on the internet about different coolants. I’ve also seen […]

I’ve got a Chevy small block 350 with a mild cam (I don’t know what the specs are – I bought the engine used), an Edelbrock Performer intake, Holley 750 […]

What’s the difference between a torque-to-yield bolt and a torque-angle bolt? I see these bolts used with newer engines. Are they the same thing? I’ve also heard that you’re not […]