Mailbag: What Does an Oil Restrictor Do?
Q: What is an oil restrictor? … A: An oil restrictor installs in the oil passages of the engine block. It limits the flow of oil to certain parts of […]
How to Set Up and Install Roller Rockers and Lifters
Our friend Eric the Car Guy has been building a 383 stroker for his #ETCGDadsTruck project (a 1990 C1500). In the process, he created a separate, one-off video covering the […]
How to Install and Fit a Nylon Cam Button
If you’re running a roller cam, it’s very likely that you’ll need to locate the camshaft to keep it from rocking back and forth. One of the more economical ways […]
Mailbag: Breaking in Ceramic Coated Headers
Q: How do I break in my new headers? … A: Most ceramic coated headers will come partially cured. The following break-in procedure will help to fully cure the coating. […]
Mailbag: A Quick Guide to Torque-to-Yield Fasteners
Q: What is a TTY bolt? … A: Torque to Yield (TTY) fasteners are used in many modern engines. When torqued properly, they provide better clamping force than standard fasteners. […]
Project Firebolt: The LSX Turbo Tacoma (Part 10): Plumbing for Fuel, Oil and Water
It’s time to tackle the important job of plumbing the lines for all the vital fluids that will keep Firebolt alive and well. This turbo 5.3 will need plenty of […]
Mailbag: Lowering ETs with a New Cam & Intake Manifold in a Vintage Chevy 3100
Q: My current project is giving me trouble. I have a 1950s-era Chevy 1/2-ton truck with a 283 at .030 overbore and .010 under rods and mains. I’m running early […]
Ask Away! with Jeff Smith: Diagnosing Oil Pressure Drops in a Big Block Chevy
I have a big-block Chevy in a ‘69 El Camino that I just purchased. I really don’t know much about the engine other than it is a 454 with an […]
Mailbag: What is Valve Float and How Do You Fix It?
Q: What is valve float? … A: Valve float is basically when the valvetrain gets out of control. There are two types of valve float: Loft and Bounce. Loft happens […]
Piston Ring Compressors: Different Strokes for Different Folks
When installing pistons, the first step is to wipe the cylinder bores with a clean, lint-free towel, and apply a small amount of conventional (non-synthetic) oil to the walls. It’s […]