Q&A

Q: How do I tell the difference between a Tremec 3650 and a T-5 transmission in my Mustang? … A: In 2001, Ford used two different manual transmissions in that […]

Q: How do I break in my new headers? … A: Most ceramic coated headers will come partially cured. The following break-in procedure will help to fully cure the coating. […]

Q: What is a TTY bolt? … A: Torque to Yield (TTY) fasteners are used in many modern engines. When torqued properly, they provide better clamping force than standard fasteners. […]

Q: How long will a set of drag slicks last? … A: The life of a drag racing tire can be determined by many factors. Tire compound, track conditions, vehicle […]

Q: My current project is giving me trouble. I have a 1950s-era Chevy 1/2-ton truck with a 283 at .030 overbore and .010 under rods and mains. I’m running early […]

I have a big-block Chevy in a ‘69 El Camino that I just purchased. I really don’t know much about the engine other than it is a 454 with an […]

Q: What is valve float? … A: Valve float is basically when the valvetrain gets out of control. There are two types of valve float: Loft and Bounce. Loft happens […]

I have a 2015 Silverado with a 5.3L with long tube headers and I’ve installed a Whipple supercharger. My 6-speed trans is now slipping. Can you give me any direction […]

I bought a set of TFS valve springs (PN 16918-16) for my Summit 8702 cam for an LS engine and I realized these springs are only good up to a […]

Q: How do I measure for a new steering column? … A: Measuring for a new steering column is pretty easy. Follow the steps below to ensure you will get the […]