Video: How to Install a Timing Chain Set on an LS Engine
It should go without saying that properly installing an LS engine timing chain set is really, really important. So to show you exactly how to do it, the engine building […]
Video: Good LS Camshaft Installation Tips, Techniques & Best Practices
Many engine builders refer to the camshaft as the heart of the engine—and for good reason. After all, it plays an integral role in the engine’s overall performance and demands […]
Video: Smart Tips & Techniques for Installing Pistons & Connecting Rods Into an LS Engine
All your hard engine work and fancy performance parts are for naught if your rotating assembly isn’t properly installed. So to that end, we found this video from the engine […]
Video: How to Install Piston Rings on an LS Piston
Alright, so the crank is properly seated in the block, and you’re getting ready to start putting together the rest of the rotating assembly. First up, getting the piston rings […]
Video: How to Correctly Install a Crankshaft Into an LS Engine
For a lot of engine builders, dropping the crankshaft into the engine block sets the tone for the rest of the project. It’s a critical early step that relies on […]
Video: Where (& How) to Install the Oil Galley Barbell & Coolant Block-Off Plugs in an LS Engine
Before you start tossing parts back onto your LS engine block to begin your rebuild, it’s absolutely vital that you’ve got all of the proper LS coolant passage block-off plugs […]