How do I tell the correct heat range spark plug for an engine? – Mark S. Jeff Smith: Simple questions sometimes require a bit longer answers. This is one of those […]
I’m asking this for a friend and I know you will have suggestions. He’s building a vintage El Camino and has decided on an LS swap. He wants 650-700 hp […]
I just bought a used 5.3L iron block engine out of a truck. I’ve decided to put new replacement pistons and rings because I found a set of cheap take-out […]
You did a tech answer around two years ago which was about adding a set of Vortec heads to a small-block Chevy. How much of a horsepower gain could you […]
I’m confused. I see all kinds of opinions about iridium and platinum spark plugs versus the normal copper plugs. Some say they’re good while others say not to use them […]
I recently purchased a’71 Camaro with a small-block and a 700R4 overdrive trans. The guy who I bought it from said the trans has a lockup converter and that everything […]
I have a Chevy II with a 355 cubic inch small-block and a Muncie four-speed. Over the years, I’ve made some small suspension modifications with Global West De-A-Lum bushings. On […]
I’m building an in-tank fuel pump for a fuel injection conversion in a ’69 Nova with a small-block. I have no experience running lines for relatively high pressure injection stuff. […]
I see where Summit Racing lists a TCI transmission that was originally a 4L80E – but they list it as a six-speed transmission. I’ve heard a little about this—did they […]