I just bought a small block 1966 El Camino that has had some modifications with an engine swap and a front disc brake conversion. The guy who sold it to […]
We get a lot of questions about brake system installation, troubleshooting, setup, and service around here. …So many in fact, that we can’t answer them all. To help remedy that, […]
One of the most commonly overlooked aspects of a brake system install or retrofit is the need to bleed the brake master cylinder before it is installed in a vehicle. […]
It’s a big “duh” to say that brakes are vitally important to your driving safety. Yet, while hydraulic brake systems have been around for over a century now, if you’re […]
I have a brake bleeding question. We installed a Wilwood four-wheel disc brake system in my ’68 Nova about 15 years ago, and for a couple of years of driving […]
If you need to replace or install a brake master cylinder, you’re going to have to “bench bleed” it before bolting the assembly to your firewall. That’s because, due to […]
When it comes time to add brake fluid to your brake system, you’ll do it at the master cylinder. But it’s not as simple as topping off the reservoir and […]
Do you want to know how a master cylinder works or how to know if your master cylinder is going bad? Or the difference between a single reservoir versus a […]